Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
●
Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
●
Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
●
Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
●
Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
●
Do not attempt to open the device other than as
instructed in this guide.
●
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
●
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
●
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
●
Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
●
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
●
Use chargers indoors.
●
Always create a backup of data you want to keep, such
as contacts and calendar notes.
●
To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
© 2009 Nokia. All rights reserved.
166
properly, take it to the nearest authorized service facility
for service.
© 2009 Nokia. All rights reserved.
167