Colour and lighting settings
In the active toolbar, select from the following:
●
Flash mode
( ) (image only) — Select the desired
flash mode.
●
Colour tone
( ) — Select a colour effect.
●
White balance
( ) — Select the current lighting
condition. This allows the camera to reproduce colours
more accurately.
●
Exposure compensation
( ) (image only) — If you
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to +1
or +2 to compensate for the background brightness.
For light subjects against a dark background, use -1 or
-2.
●
Sharpness
( ) (image only) — Adjust the sharpness
of the image.
●
Contrast
( ) (image only) — Adjust the difference
between the lightest and darkest parts of the image.
●
Light sensitivity
( ) (image only) — Increase the
light sensitivity in low light conditions to avoid too
dark images.
The screen display changes to match the settings you
make.
The available settings vary depending on the selected
camera.
© 2009 Nokia. All rights reserved.
69
The setup settings are shooting-mode specific. Switching
between the modes does not reset the defined settings.
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the colour and lighting settings
are replaced by the selected scene. You can change the
setup settings after selecting a scene if needed.